1 Pack of 5 Replacement Break Glass for Fire Alarm Call Points

Product Information

In the wireless fire alarm system, a radio signal is transmitted from the detector (such as heat detector) or call point to the central fire alarm system to activate the alarm circuit. It is vital that, in the event of an emergency, all fire call points can be easily reached – no one should have to travel over 45m to reach an alarm call point, and in environments where a fire could spread rapidly, the maximum distance is shortened to 20m. Fire alarm call point covers are also essential for maintaining the integrity of your manual call point fire alarms. Call point covers are needed to protect call points from weather damage and other wear and tear that they will experience when they are installed in an indoor or outdoor location. Concerns about false alarms – if you have concerns about your call points being used illegitimately, you can protect your call points with Alarmed Call Point Covers. These large, unique covers do not prevent the call points from being used in an actual emergency, however, they do protect call points from being damaged by vandalism, weather, or accidental activation. Light scattering smoke detectors work based on Tindal effect (it is an effect of scattering of light when light beam passes through a colloid (a homogeneous (a substance that is consistent or uniform throughout its volume) mixture in which the dispersed particles do not settle out).

SSP's range of fire alarm call point covers have been designed to significantly reduce false and malicious fire alarms set off around your building. Whether you are a school, college, university, business or any other building that is open to the public, this new low-profile fire alarm call point cover can be fitted over the top of the existing red break glass unit When deciding where to place fire call points, it is essential to remember to put them near areas where risks are higher, such as kitchens.The multi sensor detector (also known as multi-criteria alarm) is a sensitive device which combines the input signal from both heat and optical sensors and used for wide range of fires with lower rate of unwanted false alarms. A fire alarm system is a mechanism of different interconnected devises and components used to alert us in case of emergency especially fire to protect the staff and general public by taking appropriate actions.

Repeated false alarms can cause many problems, whether it be loss of earnings, revenue or just loss of staff and pupil focus. They can put emergency responders and the public at greater risk attending a non emergency and even cause complacency and risk fatigue with staff, pupils and members of the public, meaning that they are less likely to respond in a real emergency situation.Here we look at five paper-based visitor systems and ask which ones are compliant with the new GDPR legislation