LEONLITE COB LED Security Light, Commercial Motion Sensor Flood Lights Outdoor, 3 Modes Motion Detector+Dusk to Dawn+Switch Control, 100-277V, Adjustable 2-Head, IP65, 5000K Daylight, ETL, White

Product Information

Not only do they provide an extra layer of security, but they also offer a way to deter burglars and keep your property safe.

The included gaskets, which seal the bulbs in their casings, are a bit weak, so don’t screw too tight when installing. After you check out our FAQ section, head over to our guide to home security for more ideas on how to protect your home. Introducing an LED security light can help you feel safe and secure in your home by providing a bright, intense light. Your home won’t have an eyesore on it, but criminals may not sit it and decide that it’s not worth trying to case your place (though the lights turning on as they get close hopefully will do the trick). adjustable head design】3 led security light heads and 1 motion sensor head can be adjusted to different angles as your requirements.

the beam angle is 120 ° and its sensing distance is up to 8m, which means it can widely illuminates garden, backyard, garage, lane, fr.

Dusk-to-Dawn Mode – Turn the three knobs counterclockwise until the lowest setting and then slip the switch to D2D mode, this puts the light into dusk-to-dawn mode.They simply don’t produce as much light as wired lights can, and they tend to have sensors that can’t detect quite as far out. Powered by 3C batteries (not included), it emits a powerful 400 lumens, bright enough for most settings.

newly upgraded pir floodlight with remote control】outdoor security lights with motion sensor is constantly upgraded. modes with remote control]: meikee led outdoor security lights with motion sensor 42w achieves 3600lm ultra brightness, sensing distance adjustable: 6m, 9m, 12m, lighting time(45s-90s-120s-5min-10min), lighting mode(24 hours detection mode, night only detection mode, and constant on mode). Five illustrations helped with the installation, although we could have used an image for one step that required attaching the ground wire to the crossbar. If you use a separate smart sensor to make your existing fixtures motion sensor lights, you’ll simply have to replace the bulbs when they burn out.

Adjustable design: The knuckle mount lets you adjust the light 180°, letting you find the right lighting angle to light up the area you want. Here in the present, PopSci is fully committed to helping readers navigate the increasingly intimidating array of devices on the market right now.